Airspeed on iNAV OSD <> DJI HD - possible to toggle between GPS and Air Speed?

[IdefixRC]

Hi there,

I recently upgraded my Matek FS411 (running full duplex soft serial FW) powered plane to DJI HD and have the video and OSD working fine.
I understand that the DJI HD system still has limitation in terms of custom OSD data which can be displayed (e.g. no throttle stick position data etc). I also noticed that while I can get GPS speed working fine, the airspeed sensor using the pitot tube in my plane does not show up.

While I wait for DJI to implement this on their side, is there a way I can map the airspeed data from the pivot to the GPS speed readout inside of iNAV, ideally via CLI (I could custom compile the FW but would rather not go through the trouble if I can help it). If it possible to remap the pitot airspeed to the GPS airspeed data stream then the DJI FPV system would display the data from the desired sensor (might even be a feature iNAV could incorporate to toggle the DJI OSD output between GPS speed and airspeed as option?).

Thanks !!

[IdefixRC]

ahhhhh........sorry. saw this is already added to 3.0 RC..... :-) Will try that one :-)