Skip to content

beta-checklist.md

Latest commit

 

History

History
73 lines (49 loc) · 2.65 KB

beta-checklist.md

File metadata and controls

73 lines (49 loc) · 2.65 KB
Raw

Beta checklist

Miranda has no telemetry, so this walk-through is how the beta gets measured. It takes about ten minutes. Note the numbers as you go and paste them into a beta feedback issue with the output of mir doctor --share.

Each step maps to a release gate in the beta roadmap.

1. First minute (gate: install → terminal under 60 s)

Start a timer. On a machine that has never run Miranda:

curl -fsSL https://raw.githubusercontent.com/srcfl/miranda/main/install.sh | MIR_CHANNEL=beta sh
mir up

Scan the QR with your phone, create the passkey, compare the safety number, confirm. Stop the timer when the terminal is live.

Note down: total seconds; where you waited or hesitated; anything you had to read twice.

2. Reconnect (gate: resume under 3 s)

With a session open on the phone: turn Wi-Fi off so it flips to cellular. Watch the status pill.

Note down: roughly how long until the terminal was live again; whether the pill told the truth the whole time; the reconnected in … line if you were attached from the CLI.

3. Warm switching

Run mir up on a second machine (pair it when asked). Open both from one browser tab and switch between them a few times.

Note down: whether switching felt instant; whether either session dropped; what the machine strip showed while a machine was reconnecting.

4. Rename

Rename a machine from the phone (✎ in the terminal view). Look at another device.

Note down: whether the new name reached every device without a reload.

5. Retire and come back

Retire the second machine from the machine list. Read the confirmation before you tap it. Then bring the machine back: mir up on it, pair fresh.

Note down: whether the confirmation told you what you needed to know before you tapped; anything surprising on the way back.

6. Share a terminal

On the laptop: mir share <machine> (defaults: read-only, 1 h). On the phone — or a second person's device — open the invite link, read the safety number aloud, and have the minter approve. Watch the share open read-only, then let it expire (or mir share revoke <id>).

Note down: how long mint → joined took; whether the read-only view showed live output; whether typing into it did anything (it must not); what happened at expiry or revoke — the honest end line, or anything confusing.

7. Your setup

Note down: phone model + browser; laptop browser; passkey provider (iCloud Keychain, 1Password, …); network (home, office, cellular). This feeds the passkey/browser and NAT matrices, which are not published yet.