Program is resetting continuously

[k-shoeb]

I have changed the program a little bit to control a car. And when i am running the code, it reboots continuously.
This is the output from the serial monitor. It is getting Reset after executing the Starting i2s part of code.
Can anyone tell me why this is happening.

`ets Jul 29 2019 12:21:46

rst:0x8 (TG1WDT_SYS_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13232
load:0x40080400,len:3028
entry 0x400805e4
Starting up
Total heap: 284948
Free heap: 214484
CPU frequency: 240
Loading model
12 bytes lost due to alignment. To avoid this loss, please make sure the tensor_arena is 16 bytes aligned.
Used bytes 22604

Created Neural Net
m_pooled_energy_size=43
Created audio processor
Starting i2s
ets Jul 29 2019 12:21:46
`

[ArifulH8]

Any update @k-shoeb ?

[k-shoeb]

Any update @k-shoeb ?

Issue is solved

The problem with the code was that I had added code for an Ultrasonic Sensor out of a conditional loop.
I put that inside the loop.
Now it's working :)